PRODCUTS RANGE
Cast Iron Submersible Pump
5” Single or Multi Stage Cast Iron Submersible pump (380-415V) Single or multistage, single entry centrifugal pumps of ring section type with radial or mixed flow impellers. Radial flow impellers are with renewable/integral diffusers and mixed flow impellers with stage bowl. The plain bearings are water lubricated. Suction strainer fitted with suction casing
-
Submersible Solar pump
Submersible solar pumps are generally used for pumping from wells, and are designed to fit inside the well casing in a drilled hole. The most common casing size is 6", but 5" and 4" are also seen in older wells. Some older wells drilled for windmills are less than 4" (usually 2.25"), and solar submersible pumps will not fit. The well may be anywhere from a few feet to 1800 feet deep - but the deeper the well, the more expensive the system. Depths over 500 feet will generally cost quite a bit more. Solar powered well pumps are seldom suited for large amounts of water, such as irrigating larger fields if you have AC power available. The largest pumps generally available are 1/4 to 3 HP.
-
Submersible Water Pump
6” Single or Multi Stage Cast Iron Submersible pump (380-415V) Single or multistage, single entry centrifugal pumps of ring section type with radial or mixed flow impellers. Radial flow impellers are with renewable/integral diffusers and mixed flow impellers with stage bowl. The plain bearings are water lubricated. Suction strainer fitted with suction casing
-
Tube Well Submersible Pump
7” Single or Multi Stage Cast Iron Submersible pump (380-415V) Single or multistage, single entry centrifugal pumps of ring section type with radial or mixed flow impellers. Radial flow impellers are with renewable/integral diffusers and mixed flow impellers with stage bowl. The plain bearings are water lubricated. Suction strainer fitted with suction casing.
-
Submersible Cast Iron Pump
8” Single or Multi Stage Cast Iron Submersible pump (380-415V) Single or multistage, single entry centrifugal pumps of ring section type with radial or mixed flow impellers. Radial flow impellers are with renewable/integral diffusers and mixed flow impellers with stage bowl. The plain bearings are water lubricated. Suction strainer fitted with suction casing
-
Explosion proof lights
Explosion proof outdoor lighting fixtures are applicable for hazardous areas, zone 1 and 2. They are designed to meet UL approvement and maritime requirements High quality explosion proof outdoor lighting fixtures are available with a different housing. You can choose models with e.g. zinc coated steel or stainless steel, seawater resistant aluminium etc. There are also types with battery back up system. The lights are applicable for decks, process areas and machinery spaces Class 1 and/or 2.
Hazardous Area Lighting or Explosion Proof Lightening
- Explosion Proof Flashlights or Intrinsically Safe Flashlights (torches)
- Explosion Proof Headlamps (head lamps) or Intrinsically Safe Headlamps
- Explosion Proof LED lights
- Explosion Proof Light Fixtures
- Explosion Proof Fluorescent Lights
-
Explosion Proof Portable Stands
All the lights that we stock are Class 1 Division 1 (Div1) or Class 1 Division 2 (Div2) rated and/or ATEX Zone 1 or ATEX Zone 2 rated. Common Div 1 or ATEX Zone 1 Explosion Proof lighting is used for offshore rig lights, plant shutdown or turnaround, marine fit-outs, confined spaces and paint spray booths. Most Div 2 or ATEX Zone 2 Explosion Proof lighting is commonly used in areas that have sugar, grain, or munitions. All of these products assist in staying compliant with the OSHA’s Lighting Safety Standards.
-
Fluorescent Linear (Zone 1)
Fluorescent light fittings are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present.The range of Zone 1 Lighting has been designed to meet the main requirements of illumination of working areas and to grant a safely evacuation of the plant in case of blackouts.
-
LED Linear (Zone 1)
The LED linear light fittings are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present.
-
Floodlight (Zone 1)
The floodlights are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present. The FLDE range of ex-proof lighting has been designed to meet the main requirements of illumination of working areas.
-
LED Floodlight (Zone 1)
The floodlights are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present. The whole range has been designed to meet the main requirements of illumination of working areas.
-
Fluorescent Linear (Zone 2)
The fluorescent light fittings are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present. The range of Zone 2 Lighting has been designed to meet the main requirements of illumination of working areas.
-
LED Linear (Zone 2)
The LED tube light fittings are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present. The range has been designed to meet the main requirements of illumination of working areas.
-
JUNCTION BOX, TERMINAL BOX & ENCLOSURES
Junction Box & Enclosures are designed to satisfy most of our clients' requirements for CONTROL explosion proof electrical equipment. All equipment is manufactured using the latest technologies, both mechanical and electrical, using materials able to resist in most highly corrosive environments and to ensure a modern functionality solution and a long duration of the investment.
-
Junction Box Aluminium (Ex d)
The Ex d enclosures are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present.The range of ex proof junction boxes has been designed to meet the main requirements of power distribution, monitoring and signaling, and other electrical functions inside the hazardous area of the plant.
-
Junction & Instrumentation Box Aluminium (Ex d) CSD
The CSD series Ex d enclosures are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present.The CSD range of explosion proof junction boxes has been designed to meet the main requirements of power distribution and other electrical functions inside the hazardous area of the plant.
-
Junction & Instrumentation Box Aluminium (Ex d) GUB
GUB A series Ex d enclosures are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present.The GUB range of explosion proof enclosures has been designed to meet the main requirements of power distribution, monitoring and signaling, and other electrical functions inside the hazardous area of the plant.
-
Conduit & Terminal Box (Ex d) GUA
GUA series explosion proof junction boxes are normally installed in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present.
-
CONTROL & TERMINAL BOX GRP (EX E)
The Ex e enclosures are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present.The Ex e enclosures range of intrinsically safe enclosures has been designed to meet the main requirements of power distribution, monitoring and signaling, and other electrical functions inside the hazardous area of the plant.
-
PLUG (ZONE 1)
The series explosion proof plugs and sockets are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industries where hazardous atmospheres are potentially present.Plug and Socket configurations include 16A, 32A, 63A, 125A, with 3 Poles (3P), 4 Poles (4P) or 5 Poles (5P) options, and suitable for different Voltage requirements.
-
WALL SOCKET (ZONE 1)
The series sockets and plugs are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industries where hazardous atmospheres are potentially present.
-
PANEL SOCKET (ZONE 1)
The panel explosion proof sockets are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industries where hazardous atmospheres are potentially present.
-
COUPLER TYPE SOCKET (ZONE 1)
The sockets and plugs are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industries where hazardous atmospheres are potentially present.
-
CABLE GLANDS ARMOURED (ZONE 1 AND 2)
The cable glands are normally installed in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present.The ex proof cable gland series are designed to allow direct entry of unarmored or armoured cables into Ex d and Ex e enclosures to provide any electrical connection with external circuits.
-
CABLE GLANDS UNARMOURED FOR RIGID & FLEXIBLE CONDUITS (ZONE 1 AND 2)
The cable glands are normally installed in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present.The cable gland series are designed to allow direct entry of unarmored or armored cables into Ex d and Ex e enclosures to provide any electrical connection with external circuits.
-
DRAIN VALVES & BREATHERS (ZONE 1 AND 2)
The drain valves and breathers are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present.The drain valves and breathers are specially recommended for tropical environment where the phenomenon of water condensation mixed with chemical agents is the first cause of corrosion of the electrical components inside the enclosures.
-
MALE PLUG WITH EXTERNAL HEXAGON (ZONE 1 AND 2)
The adaptors and plugs are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present.
-
FEMALE-FEMALE COUPLINGS & ADAPTORS (ZONE 1 AND 2)
The adaptors and plugs are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present.
-
Male-Male Nipples & Adaptors (Zone 1 and 2)
The adaptors and plugs are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present.
-
Gas Detection
We offer various types of gas detection instruments for oxygen, flammable and toxic gas hazards. Fixed gas detectors protect plant; portable gas monitors protect people, and control panels integrate gas detection into engineered fire and gas fixed systems
-
CCTV
We specialize in providing an extensive range of CCTV cameras and performing research and development in Camera DSP (Digital Signal Processors) for other renowned manufacturers. Our products include, but not limited to, Wide Dynamic Range Cameras, License Plate Recognition Cameras, and High-Definition Cameras, featuring quality imaging chips.
